-
Experts In Commercial TPO Flat Roofs
-
Founded 1985
-
Licensed | Bonded | Insured
-
A+ Rated BBB Member
-
Outstanding Customer Service
-
24-Hour Emergency Repair Service
832-845-4708
Mechanically Attached vs. Fully Adhered
Definitions
A TPO (thermoplastic olefin) roof is a single-ply roofing membrane that is commonly used on flat or low-slope roofs. It is known for its durability, energy efficiency, and ease of installation. Below is a schematic of a typical TPO roof system:
1. TPO membrane: The main waterproofing layer of the roof, typically made of a single-ply thermoplastic material.
2. Insulation: Provides thermal resistance and helps to regulate temperature in the building.
3. Cover board: A rigid layer that provides protection for the insulation and increases the overall durability of the roof.
4. Roof deck: The structural base of the roof, usually made of plywood or metal.
5. Flashing: Metal strips that are installed around roof penetrations, edges, and corners to prevent water infiltration.
6. Edge detail: A termination bar or metal edge that helps to secure the TPO membrane at the perimeter of the roof.
7. Roof membrane adhesive: A bonding adhesive used to secure the TPO membrane to the insulation or cover board.
8. Roofing screws and plates: Fasteners used to secure the TPO membrane to the roof deck.
9. Roof drain: A drainage system that allows water to flow off the roof and away from the building. 10. Roof curb: A raised structure that supports rooftop equipment such as HVAC units or skylights. Overall, a TPO roof system is a cost-effective and reliable option for commercial and industrial buildings. Its white reflective surface can help reduce energy costs by reflecting heat and UV rays, making it a popular choice for green building projects.
ABOUT TPO
A TPO roof structure, short for Thermoplastic Polyolefin, represents a modern roofing solution admired for its durability and versatility.
At its core, a TPO roof system encompasses a single-ply roofing membrane, ingeniously reinforced by a securely installed solid substrate, which frequently takes the form of an engineered insulation system.
Typically employed on flat or low-sloping roofs, TPO roofing offers a comprehensive solution for diverse architectural needs. One notable aspect of TPO roofing lies in its flexibility, allowing it to adapt to various installation requirements and building designs with ease. The TPO roof membrane, available in a range of thicknesses, commonly spans from 40-mil to 80-mils or even thicker, catering to specific project demands and environmental factors. This variability in thickness ensures that TPO roofs can effectively withstand the rigors of different climates and provide long-lasting protection against the elements. Additionally, the composition of TPO membranes often includes advanced additives and reinforcements, enhancing their resistance to UV radiation, punctures, and other external stresses. Thus, TPO roofing emerges as a comprehensive solution, offering both structural integrity and aesthetic appeal for a wide array of commercial and industrial applications.